Product Description This is the Mode 2 Helicopter Version Futaba 10CG Transmitter and R6014HS 14-ch Receiver with the 2.4GHz FASST system. No Servos Included This version is Mode 2 **For European Standard Mode 1 order FUTK9258** This heli version will default to helicopter settings, with mode 2 stick operation when powered up and has a non-ratcheted throttle stick. FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies Dual antenna diversity enables FASST system to automatically and seamlessly select the best reception between the two antennas built into the receiver ensuring that the aircraft stays under constant control of transmitter regardless of altitude Graphics for programming swash plate types, swash ring and logic switches allowing timer activation or other function just by changing positions of specific sticks or functions 6 programmable heli mixes Hover/pitch Hover throttle 8 swash plate types with graphics Swash AFR 5 point revo mixing Gyro menu 7 point throttle and pitch curves with delay High/low pitch setting Throttle hold and three idle-ups with delay One year limited warranty INCLUDES: Futaba 10C Transmitter NT8S700B 9.6V 700mAh NiCd Transmitter Battery , FUTM1460 NR-4RB 1000mAh NiCd Receiver Battery, FUTM1380 FBC-19B RX, TX Wall Charger, FUTM1830 R6014HS Receiver, FUTL7645 Switch Harness 8" (203mm) Servo Extension Neck Strap, FUTM5690 REQUIRES: Servos depending on type of aircraft SPECS: Transmitter; Power Supply: 9.6V NT8S700B NiCd battery Receiver; Receiving Frequency: 2.4GHz Power Requirement: 4.8 - 6V Current Drain: 70mA Size: 2.06 x 1.48 x 0.63" (52.3 x 37.5 x 16.0mm) Weight: 0.72oz (20.8g)
